Filter By

2m DisplayPort (M) to SVGA (M) Cable

  • Display port v1.1 Compliant
  • Embedded clock architecture to reduce EMI susceptibility
  • Supports resolutions greater than QXGA (2048 x 1536) at 24-bit colour depths
  • Supports existing VESA and CEA standards
  • Supports hot plug detection as well as link status failure
  • Supports a minimum of 1080P resolution at 24bpp, 50/60 Hz at 15 metres
  • Supports display port signal to VGA signal
  • Supports video bandwidth up to 10.8Gbps
  • Connector : 20pin display port to 15pin VGA
£14.49
3m DisplayPort (M) to SVGA (M) Cable

  • Display port v1.1 Compliant
  • Embedded clock architecture to reduce EMI susceptibility
  • Supports resolutions greater than QXGA (2048 x 1536) at 24-bit colour depths
  • Supports existing VESA and CEA standards
  • Supports hot plug detection as well as link status failure
  • Supports a minimum of 1080P resolution at 24bpp, 50/60 Hz at 15 metres
  • Supports display port signal to VGA signal
  • Supports video bandwidth up to 10.8Gbps
  • Connector : 20pin display port to 15pin VGA
£14.84
50m USB 2.0 Over Cat5e Extender

  • Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices
  • Allows a USB device to have its cable length extended up to 50m
  • Support suspend/resume detection
  • Supports Hot Plug
  • No software driver required
  • Supports up to Windows 10
£55.44
5m DisplayPort (M) to SVGA (M) Cable

  • Display port v1.1 Compliant
  • Embedded clock architecture to reduce EMI susceptibility
  • Supports resolutions greater than QXGA (2048 x 1536) at 24-bit colour depths
  • Supports existing VESA and CEA standards
  • Supports hot plug detection as well as link status failure
  • Supports a minimum of 1080P resolution at 24bpp, 50/60 Hz at 15 metres
  • Supports display port signal to VGA signal
  • Supports video bandwidth up to 10.8Gbps
  • Connector : 20pin display port to 15pin VGA
£16.51
USB2.0 Ethernet Adapter 10/100 Mbps

  • Compliant with USB 2.0 and USB 1.1 specifications
  • Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
  • Supports both Full-Duplex and Half-Duplex operations
  • Supports Wake-on-LAN function
  • Powered by USB port only
  • Equipped with diagnostic LEDs
  • Plug & Play installation
  • IBM compatible Pentium-233 MHz or faster PC or Mac
  • Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x
£17.99
USB 2.0 Gigabit Ethernet Adapter

  • Converts a USB port into a 10/100/1000 Base-T Ethernet port
  • Compliant with USB 2.0/1.1 and IEEE 802.3/3u/3ab standards
  • Supports Wake-on-LAN (WoL) and remote wakeup
  • Reduces CPU load with IPv4/IPv6 packet Checksum Offload Engine
  • Supports Windows 11 and macOS 12
  • ASIX AX88178A chipset
£17.92
USB3.0 Gigabit Ethernet Adapter with Hub

  • Small, portable design
  • Supports Wake-on-LAN function
  • Supports Green Ethernet
  • Supports IEEE 802.3az (Energy Efficient Ethernet)
  • Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading
  • OS Support: Windows 10, Win 8, Win 7 and Mac OS
£33.60
Loading...