Sort by:
- Compliant with USB 2.0 and USB 1.1 specifications
- Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
- Supports both Full-Duplex and Half-Duplex operations
- Supports Wake-on-LAN function
- Powered by USB port only
- Equipped with diagnostic LEDs
- Plug & Play installation
- IBM compatible Pentium-233 MHz or faster PC or Mac
- Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x
£17.99
- Converts a USB port into a 10/100/1000 Base-T Ethernet port
- Compliant with USB 2.0/1.1 and IEEE 802.3/3u/3ab standards
- Supports Wake-on-LAN (WoL) and remote wakeup
- Reduces CPU load with IPv4/IPv6 packet Checksum Offload Engine
- Supports Windows 11 and macOS 12
- ASIX AX88178A chipset
£17.92
- Input : DisplayPort
- Output : HDMI High Speed up to 4k x 2k @ 30Hz
- Active adapter
- Bandwidth: 10.2Gbps
- 3D Support
- Audio support
- Supports HDCP v1.3
- Plug n Play
- Supports AMD/ATI Eyefinity
- 20cm built-in lead
- With ferrite
£18.49
- Small, portable design
- Supports Wake-on-LAN function
- Supports Green Ethernet
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading
- OS Support: Windows 10, Win 8, Win 7 and Mac OS
£33.60
- Passive adapter
- Supports mini DisplayPort 1.1a and HDMI 1.3b output
- Supports HDMI resolution of 1080p
- Supports HDMI 225Mhz/2.25Gbps per channel (6.75Gbps total)
- Supports HDMI 12-bit per channel (36-bit total) deep colour
- Supports uncompressed audio such LPCM
- Supports compressed audio such as DTS Digital, Dolby
- Digital including DTS-HD and dolby true HD
- Powered by DisplayPort
£9.97
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- Bright LED
- Compatible with USB 1.0/1.1 & 2.0 ports
£6.14
- Passive adapter
- Supports mini DisplayPort 1.1a and HDMI 1.3b output
- Supports HDMI resolution of 1080p
- Supports HDMI 225Mhz/2.25Gbps per channel (6.75Gbps total)
- Supports HDMI 12-bit per channel (36-bit total) deep colour
- Supports uncompressed audio such LPCM
- Supports compressed audio such as DTS Digital, Dolby
- Digital including DTS-HD and dolby true HD
- Powered by DisplayPort
£11.23
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- 3 Bright LED’s
- Lamp shade design
- Compatible with USB 1.0/1.1 & 2.0 ports
£6.25
- Passive adapter
- Supports mini DisplayPort 1.1a and HDMI 1.3b output
- Supports HDMI resolution of 1080p
- Supports HDMI 225Mhz/2.25Gbps per channel (6.75Gbps total)
- Supports HDMI 12-bit per channel (36-bit total) deep colour
- Supports uncompressed audio such LPCM
- Supports compressed audio such as DTS Digital, Dolby
- Digital including DTS-HD and dolby true HD
- Powered by DisplayPort
£13.46
- Full compliance with USB 1.1 & USB 2.0 specifications.
- Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates
- Over current detection
- Driverless installation (uses Windows driver)
£10.24
- USB 2.0 Compliant
- 4 Port
- Supports High Speed (480MBps)
- Built-in 11cm USB Type A cable
- USB and ACPI Compliant
- Supports Over Current Protection
- Plug n Play
- Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+
£10.73
- 4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter)
- Supports over current protection on each port.
- Provides 4 Type A Female and 1 Type B Female Connectors
- Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps)
- Compliant with USB specification Revision 2.0
- Compliant with Windows 10, Win 8, Win 7 and below
- Power LED to indicate Self-power or Bus Power
- Supports Plug and Play
£15.44
check_circle
check_circle
