Sort by:
- Network Cable Economiser
- Combines/Divides the data into 2x 2 Twisted Pair Signals
- Works with UTP CAT5E (Not full Duplex)
- 21cm Lead
£3.48
- Compliant with USB 2.0 and USB 1.1 specifications
- Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
- Supports both Full-Duplex and Half-Duplex operations
- Supports Wake-on-LAN function
- Powered by USB port only
- Equipped with diagnostic LEDs
- Plug & Play installation
- IBM compatible Pentium-233 MHz or faster PC or Mac
- Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x
£14.17
- Network Cable Economiser
- Allows two CAT5e connections to share one CAT5e port
- 21cm lead
- Unshielded
- For Digital and Voice applications
£4.67
- Converts a USB port into a 10/100/1000 Base-T Ethernet port
- Compliant with USB 2.0/1.1 and IEEE 802.3/3u/3ab standards
- Supports Wake-on-LAN (WoL) and remote wakeup
- Reduces CPU load with IPv4/IPv6 packet Checksum Offload Engine
- Supports Windows 11 and macOS 12
- ASIX AX88178A chipset
£14.10
- Network Cable Economiser
- Allows two CAT5e connections to share one CAT5e port
- 21cm lead
- Unshielded
- For Voice applications
£4.40
- Small, portable design
- Supports Wake-on-LAN function
- Supports Green Ethernet
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading
- OS Support: Windows 10, Win 8, Win 7 and Mac OS
£31.20
- 21cm lead
- STP (Shielded Twisted Pair)
- Cat5e
- Moulded
- Grey
- Allows two CAT5e connections to share one CAT5e port
- For data networks
£5.64
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- Bright LED
- Compatible with USB 1.0/1.1 & 2.0 ports
£1.25
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- 3 Bright LED’s
- Lamp shade design
- Compatible with USB 1.0/1.1 & 2.0 ports
£1.37
- Supports USB-C and Gigabit Ethernet port
- PXE Boot Supported
- No extra driver software is required, and auto driver installation
- Supports 10/100 /1000Mbps bandwidth
- Supports twisted pair crossover detection and auto-correction
£17.28
- Full compliance with USB 1.1 & USB 2.0 specifications.
- Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates
- Over current detection
- Driverless installation (uses Windows driver)
£5.71
- Compliant with USB 2.0 and USB 1.1 specifications
- Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
- Supports both Full-Duplex and Half-Duplex operations
- Supports Wake-on-LAN function
- Powered by USB port only
- Plug & Play
- Supports Windows 10 and Mac OS X 10.x
£11.18
check_circle
check_circle