Sort by:
- USB-C (Male)
- Supports DP1.4 Alt mode with 32.4Gbps all lanes, per lane 8.1Gbps (HBR3),5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)
- Ethernet (Female) x1
- 10 / 100 / 1000 Mbps
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB 4:4:4, YCbCr 4:4:4, 4:2:2
- Supports 6 / 8 / 10 / 12bit colour depth
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-A (Female) x1
- Support USB 5Gbps data transmission
- Support max 7.5W(5v/1.5A) downstream charging
- USB-C (Female) x1
- Power Delivery 3.0 Port
£28.60
- Power Splitter Cable 5¼ to 3½ & 5¼
- Adds 1 Molex mini-spox
£0.66
- Impact punch down tool
- Adjustable
- High pressure 15 ± 2Kg
- Low pressure 10 ± 2Kg
- Reversible blade
£3.50
- Supports USB-C input and HDMI output
- Supports DisplayPort 1.2 Alt-mode
- Content protection of HDCP
- Supports HDMI resolution up to 4kx 2k @ 30Hz / 3840x 2160 @30Hz
- USB-C interfaces support plug and play, hot swap
- USB-C female port supplies power up to 60W (20V/3A)
- Supports per lane data rates of 2.7Gbps (HBR) and 1.62Gbps (RBR)
£11.21
- Power splitter cable, 4 pin Molex to twin 4 pin Floppy Disk Drive connector (mini-spox). Adds two floppy drive connectors by using a 4 pin Molex.
£0.64
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£17.63
- USB-C (Male)
- Supports DP1.2 Alt mode with max 21.6Gbps Bandwidth, HBR2 (5.4Gbps), HBR (2.7Gbps per lane), RBR (1.65Gbps per lane)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB4:4:4, YCbCr4:4:4 and YCbCr4:2:2
- Supports 6bit / 8bit / 10bit 12bit colour depth
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-C (Female) x1
- Power Delivery 3.0 Port
£13.34
- Extension Cable 5¼ Male to Female
- 18cm (From end to end)
£0.44
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£20.33
- USB-C (Male)
- Support DP1.4 Alt mode with 32.4Gbps all lanes, per lane 8.1Gbps (HBR3),5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB 4:4:4, YCbCr 4:4:4 ,4:2:2 ,4:2:0,
- Supports 8bit/10bit deep colour
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-A (Female) x1
- Support USB 5Gbps data transmission
- Support max 7.5W(5v/1.5A) downstream charging
- USB-C (Female) x1
- Power Delivery 3.0 Port
£22.01
- Power splitter cable Molex to 3x Molex
- Adds 2 extra 4 Pin Molex connectors
£0.73
- Power
- Volts: 12V
- Amps: 1.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£14.92
check_circle
check_circle