Sort by:
- Power Splitter Cable 5¼ to 3½ & 5¼
- Adds 1 Molex mini-spox
£0.66
- Impact punch down tool
- Adjustable
- High pressure 15 ± 2Kg
- Low pressure 10 ± 2Kg
- Reversible blade
£3.50
- 19 Inch metal bar
- 1U
- 5 removable plastic holders
- Black
- Internal dimensions of the rings are 60mm x 33mm
- Supplied with 4 bolts
£5.23
- Power splitter cable, 4 pin Molex to twin 4 pin Floppy Disk Drive connector (mini-spox). Adds two floppy drive connectors by using a 4 pin Molex.
£0.64
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£17.63
- 19Inch bar
- 1U
- 5 removable plastic holders
- Internal dimensions of the rings are 53mm x 28mm
- Black
£3.65
- Extension Cable 5¼ Male to Female
- 18cm (From end to end)
£0.44
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£20.33
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£19.13
- Power splitter cable Molex to 3x Molex
- Adds 2 extra 4 Pin Molex connectors
£0.73
- Power
- Volts: 12V
- Amps: 1.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£14.92
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£56.65
check_circle
check_circle
