Sort by:
- USB-C (Male)
- Supports DP1.2 Alt mode with max 21.6Gbps Bandwidth, HBR2 (5.4Gbps), HBR (2.7Gbps per lane), RBR (1.65Gbps per lane)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB4:4:4, YCbCr4:4:4 and YCbCr4:2:2
- Supports 6bit / 8bit / 10bit 12bit colour depth
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-C (Female) x1
- Power Delivery 3.0 Port
£13.34
- Single faceplate
- Pre-cut
- SVGA cable stub provided
- 3RCA cable stubs provided
- SVGA and RCA cables available on request
£14.02
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£20.33
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£19.13
- USB-C (Male)
- Support DP1.4 Alt mode with 32.4Gbps all lanes, per lane 8.1Gbps (HBR3),5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB 4:4:4, YCbCr 4:4:4 ,4:2:2 ,4:2:0,
- Supports 8bit/10bit deep colour
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-A (Female) x1
- Support USB 5Gbps data transmission
- Support max 7.5W(5v/1.5A) downstream charging
- USB-C (Female) x1
- Power Delivery 3.0 Port
£22.01
- Single faceplate
- Pre-cut
- SVGA cable stub provided
- 3RCA cable stubs provided
- SVGA and RCA cables available on request
£14.63
- Power
- Volts: 12V
- Amps: 1.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£14.92
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£56.65
- Supports USB-C, DVI-D, USB3.0 and Gigabit Ethernet interface
- Supports USB 3.0 Super Speed (5Gbps) transmission, backwards compatible with USB2.0
- Supports BC1.2, the power of USB-A port can be up to 7.5w (5v/1.5a)
- Supports DVI video resolution max up to 1080p @60Hz
- Supports 10/ 100/ 1000Mbps bandwidth
- Supports twisted pair crossover detection and auto-correction
- USB 3.0 port supports to charge and transmit data for the USB device simultaneously
- USB-C female port supplies power up to 60w
£25.62
- Single faceplate
- Pre-cut
- SVGA cable stub provided
- 3RCA cable stubs provided
- SVGA and RCA cables available on request
£16.06
- Power
- Volts: 12V
- Amps: 3.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.5mm
£14.92
- 19 Inch 1u Rack mountable
- 24 Cat5e Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£16.40
check_circle
check_circle