Sort by:
- 19 Inch metal bar
- 1U
- 5 removable plastic holders
- Black
- Internal dimensions of the rings are 60mm x 33mm
- Supplied with 4 bolts
£5.23
- Supports USB-C input and HDMI output
- Supports DisplayPort 1.2 Alt-mode
- Content protection of HDCP
- Supports HDMI resolution up to 4kx 2k @ 30Hz / 3840x 2160 @30Hz
- USB-C interfaces support plug and play, hot swap
- USB-C female port supplies power up to 60W (20V/3A)
- Supports per lane data rates of 2.7Gbps (HBR) and 1.62Gbps (RBR)
£11.21
- Power splitter cable, 4 pin Molex to twin 4 pin Floppy Disk Drive connector (mini-spox). Adds two floppy drive connectors by using a 4 pin Molex.
£0.64
- 6.35mm Male
- 3.5mm female
- Nickel
- Metal Connector
£0.41
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£17.63
- 19Inch bar
- 1U
- 5 removable plastic holders
- Internal dimensions of the rings are 53mm x 28mm
- Black
£3.65
- USB-C (Male)
- Supports DP1.2 Alt mode with max 21.6Gbps Bandwidth, HBR2 (5.4Gbps), HBR (2.7Gbps per lane), RBR (1.65Gbps per lane)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB4:4:4, YCbCr4:4:4 and YCbCr4:2:2
- Supports 6bit / 8bit / 10bit 12bit colour depth
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-C (Female) x1
- Power Delivery 3.0 Port
£13.34
- Extension Cable 5¼ Male to Female
- 18cm (From end to end)
£0.44
- 3.5mm Stereo Male to 6.35mm Stereo Female
- Moulded Black Housing
- Gold Flashed Contacts
£0.41
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£20.33
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£19.13
- USB-C (Male)
- Support DP1.4 Alt mode with 32.4Gbps all lanes, per lane 8.1Gbps (HBR3),5.4 Gbps (HBR2), 2.7 Gbps (HBR) and 1.62 Gbps (RBR)
- HDMI (Female) x1
- Supports HDMI max 4K/60Hz, 8bit with max 18Gbps Bandwidth
- Supports RGB 4:4:4, YCbCr 4:4:4 ,4:2:2 ,4:2:0,
- Supports 8bit/10bit deep colour
- Supports HDR
- Supports HDCP v2.2 & v1.4
- USB-A (Female) x1
- Support USB 5Gbps data transmission
- Support max 7.5W(5v/1.5A) downstream charging
- USB-C (Female) x1
- Power Delivery 3.0 Port
£22.01
check_circle
check_circle
