Filter By

USB 2.0 Gigabit Ethernet Adapter

  • Converts a USB port into a 10/100/1000 Base-T Ethernet port
  • Compliant with USB 2.0/1.1 and IEEE 802.3/3u/3ab standards
  • Supports Wake-on-LAN (WoL) and remote wakeup
  • Reduces CPU load with IPv4/IPv6 packet Checksum Offload Engine
  • Supports Windows 11 and macOS 12
  • ASIX AX88178A chipset
£11.28
USB3.0 Gigabit Ethernet Adapter with Hub

  • Small, portable design
  • Supports Wake-on-LAN function
  • Supports Green Ethernet
  • Supports IEEE 802.3az (Energy Efficient Ethernet)
  • Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading
  • OS Support: Windows 10, Win 8, Win 7 and Mac OS
£24.97
2 Port USB2.0 Hub - Bus Powered

  • Full compliance with USB 1.1 & USB 2.0 specifications.
  • Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates
  • Over current detection
  • Driverless installation (uses Windows driver)
£4.58
4 Port USB2.0 Hub

  • USB 2.0 Compliant
  • 4 Port
  • Supports High Speed (480MBps)
  • Built-in 11cm USB Type A cable
  • USB and ACPI Compliant
  • Supports Over Current Protection
  • Plug n Play
  • Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+
£4.99
4 Port USB2.0 Hub - PSU

  • 4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter)
  • Supports over current protection on each port.
  • Provides 4 Type A Female and 1 Type B Female Connectors
  • Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps)
  • Compliant with USB specification Revision 2.0
  • Compliant with Windows 10, Win 8, Win 7 and below
  • Power LED to indicate Self-power or Bus Power
  • Supports Plug and Play
£9.12
10 Port USB2.0 Hub - PSU

  • 9/12 horizontally mounted and 1 foldable vertical 480Mbps ports
  • Works seamlessly with your USB1.1 and USB2.0 devices
  • Slim design, saves desk space
  • Supports “hot swapping” of all your USB devices
  • Backwards compatible with USB1.1
  • Supports data transfer rate at 1.5/12/480Mbps
  • Plug n Play
  • Supports Windows 10, Win 8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+
  • Supplied with a 150cm USB A to B cable
£30.73
13 Port USB2.0 Hub - PSU

  • 9/12 horizontally mounted and 1 foldable vertical 480Mbps ports
  • Works seamlessly with your USB1.1 and USB2.0 devices
  • Slim design, saves desk space
  • Supports “hot swapping” of all your USB devices
  • Backwards compatible with USB1.1
  • Supports data transfer rate at 1.5/12/480Mbps
  • Plug n Play
  • Supports Windows 10, Win 8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+
  • Supplied with a 150cm USB A to B cable
£32.18
USB Type C to 2 Port USB Hub & Card Reader with PD Function

  • USB-C (Male)
  • Connects to the host device
  • USB-A (Female) x2
  • Support USB 5Gbps data transmission
  • One of the two USB-A ports supports max 8W (5V/1.6A) downstream charging
  • SD Slot x1 / Micro SD Slot x1
  • Support Secure Digital v3.0 UHS-I (Ultra High Speed): SDR12 (12.5Mbyte/s) / SDR25 (25Mbyte/s) / SDR50 (50Mbyte/s) / DDR50 (50Mbyte/s) / SDR104 (104Mbyte/s)
  • SD/Micro SD slots to work simultaneously
  • USB-C (Female) x1
  • Power Delivery 3.0 Port
£14.78
15cm Leaded USB Type C (M) to Gigabit Ethernet Adapter

  • Standard USB 3.1 Type-C interface
  • Supports plug-and-play, no driver software is required
  • Supports 10/100 /1000Mbps auto-detection
  • Supports Wake-on-LAN and 'Real Wow!' (Wake-on-LAN)Technology
  • Supports twisted pair crossover detection, auto-correction(HP Auto-MDIX)
  • 15cm lead
  • Up to Windows 11 supported
  • MAC OS supported
£8.80
Loading...