Sort by:
- USB extension adapter
- Extend up to 45 metres
- No additional drivers required - Plug n Play
- Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above
£12.71
- Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices
- Allows a USB device to have its cable length extended up to 50m
- Support suspend/resume detection
- Supports Hot Plug
- No software driver required
- Supports up to Windows 10
£55.44
- USB A plug to 36 Centronic male
- USB 2.0 compliant
- 1 Mtr in length
- Compatible with Windows OS up to Win11
- Compatible with MAC OS
£8.30
- Motherboard connection to 2x USB 2.0 Type A Sockets on a PCI plate
- LL112842 AWM I/II A FT4 80oC 150V
- 18cm Leads
£9.21
- 2 x Type A Female USB Ports
- 2 x Type A Male Internal USB Connectors
- 28cm Cables
- Nickel Connectors
£6.18
- Compliant with USB 2.0 and USB 1.1 specifications
- Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
- Supports both Full-Duplex and Half-Duplex operations
- Supports Wake-on-LAN function
- Powered by USB port only
- Equipped with diagnostic LEDs
- Plug & Play installation
- IBM compatible Pentium-233 MHz or faster PC or Mac
- Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x
£17.99
- Converts a USB port into a 10/100/1000 Base-T Ethernet port
- Compliant with USB 2.0/1.1 and IEEE 802.3/3u/3ab standards
- Supports Wake-on-LAN (WoL) and remote wakeup
- Reduces CPU load with IPv4/IPv6 packet Checksum Offload Engine
- Supports Windows 11 and macOS 12
- ASIX AX88178A chipset
£17.92
- Small, portable design
- Supports Wake-on-LAN function
- Supports Green Ethernet
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading
- OS Support: Windows 10, Win 8, Win 7 and Mac OS
£33.60
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- Bright LED
- Compatible with USB 1.0/1.1 & 2.0 ports
£6.14
- USB Type A male connector
- USB Powered
- 26cm fully flexible cable
- 3 Bright LED’s
- Lamp shade design
- Compatible with USB 1.0/1.1 & 2.0 ports
£6.25
- Full compliance with USB 1.1 & USB 2.0 specifications.
- Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates
- Over current detection
- Driverless installation (uses Windows driver)
£10.24
- USB 2.0 Compliant
- 4 Port
- Supports High Speed (480MBps)
- Built-in 11cm USB Type A cable
- USB and ACPI Compliant
- Supports Over Current Protection
- Plug n Play
- Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+
£10.73
check_circle
check_circle