Sort by:
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£23.17
- Extend the VGA signal up to 80 metre away by using the VGA Extender and one CAT5/CAT6 cable
- Supports power over cable technique, only one unit (Local or Remote) needs to connect to PSU
- Both Local and Remote can act as the PSE (power source equipment)
- Maximum resolution: 2048 x 1536 60Hz (Dependant on length of extension)
- Equalization length is adjustable
- VGA signal gain is adjustable
- Metal Housing
£123.34
- 19 Inch 1u Rack mountable
- 24 Cat6 Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£22.49
- Power Splitter Cable 5¼ to 3½ & 5¼
- Adds 1 Molex mini-spox
£2.18
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£17.64
- Power Splitter Cable 5¼ to 2x 3½
- Adds 2 Molex mini-spox, looses one 4 Pin Molex
£1.66
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£45.88
- USB extension adapter
- Extend up to 45 metres
- No additional drivers required - Plug n Play
- Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above
£8.41
- Extension Cable 5¼ Male to Female
- 18cm (From end to end)
£2.74
- Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices
- Allows a USB device to have its cable length extended up to 50m
- Support suspend/resume detection
- Supports Hot Plug
- No software driver required
- Supports up to Windows 10
£55.02
- Power Splitter Cable 5¼ to 3x 5¼
- Adds 2 extra 4 Pin Molex sockets
£3.37
- 16/24/48 Port Patch Panel
- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
£33.12
check_circle
check_circle