Sort by:
- SATA Power Splitter/Extension
- 1 x Male connector
- 3 x Female connector
- Total length 85cm
£2.04
- 19 Inch 1u Rack mountable
- 24 Cat5e Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£20.51
- Supports SVGA and Audio (KVM-VGAXTAD)
- Supports a maximum distance of 150 Mtrs (492ft)
- SVGA resolution up to 1024x768
- Ultra Compact
- Compatible with CAT5, CAT5E and CAT 6 UTP Cable
£141.43
- Power Cable 5¼ to 3½
- To power a floppy drive
- About 17.5cm
£1.36
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£23.17
- Extend the VGA signal up to 80 metre away by using the VGA Extender and one CAT5/CAT6 cable
- Supports power over cable technique, only one unit (Local or Remote) needs to connect to PSU
- Both Local and Remote can act as the PSE (power source equipment)
- Maximum resolution: 2048 x 1536 60Hz (Dependant on length of extension)
- Equalization length is adjustable
- VGA signal gain is adjustable
- Metal Housing
£123.34
- IDE Power Splitter 5¼ Male - 2x 5¼ Female
- Adds one extra 4 Pin Molex socket
- 23cm
£2.30
- 19 Inch 1u Rack mountable
- 24 Cat6 Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£22.49
- Extend the VGA signal up to 300 metre away by using the VGA Extender and one CAT5/CAT6 cable
- Supports power over cable technique, only one unit (Local or Remote) needs to connect to PSU
- Both Local and Remote can act as the PSE (power source equipment)
- Maximum resolution: 2048 x 1536 60Hz (Dependant on length of extension)
- Equalization length is adjustable
- VGA signal gain is adjustable
- Support Audio
- Metal Housing
£170.64
- Power Splitter Cable 5¼ to 3½ & 5¼
- Adds 1 Molex mini-spox
£2.18
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£17.64
- Link cable: UL2919 (3+4 or 3+6)
- VGA bandwidth: 30~450 MHz(680*480 ~ 2048*1536)(H: 32~38.5KHz)/(V:60~85Hz)
- With stereo audio/2 Ch Audio Bandwidth 20~30KHz
- Compatible to VGA, SVGA, Multisync, G4,G3 Monitor
- Operating temperature: -0 to 70c
- Extend distances: 50m (using UL-2919 cable)
£2.04
check_circle
check_circle