Sort by:
- Supports USB-C, VGA, USB3.0 and Gigabit Ethernet port
- Supports USB 3.0 Super Speed (5Gbps) transmission, backwards compatible with USB2.0
- USB 3.0 port supports to charge and transmit data for the USB device simultaneously
- Supports BC1.2, the power of USB-A port can be up to 7.5w (5V/1.5a)
- Supports VGA resolution up to 2048x 1152 @60Hz / 1080p @60Hz
- Supports 10/ 100/1000Mbps bandwidth
- Supports twisted pair crossover detection and auto-correction
£23.83
- 4 Pin Molex to 4 Pin P4 power
- 15cm
£0.44
- Single faceplate
- Pre-cut
- SVGA Stub provided
- SVGA cables available on request
£6.60
- Cable Length: 1 Meter
- Extension Connector: SMA
- Antenna Connector: SMA
- Magnetic base
- 1M Extension cable
- Kit includes two extension bases
- Extend 4G LTE aerials away from the router
- Allows aerials to be located in the optimum position
- Compatible with DrayTek Vigor routers with integrated LTE modems
- Suitable for use with all 4G LTE and 3G frequency bands in use in the UK
- Available in black only
- Suitable for indoor use only
- Can be wall mounted (use 3M Command strips, not included)
£17.63
- Supports USB-C input and VGA output
- Flexible USB Type-C Switching
- Supports DisplayPort 1.2 Altmode
- Supports per lane data rates of 2.7Gbps (HBR) and 1.62Gbps (RBR)
- Supports resolution up to 2048x1152
- USB bus power (no external power supply)
- 15cm lead
£8.71
- ATX Cable
- 24pin Male to 24pin female
- 30cm
- 18 AWG
- Colour : Black
£2.28
- Single faceplate
- Pre-cut
- SVGA Stub provided
- SVGA cables available on request
£7.99
- Omnidirectional Outdoor Aerial
- 4-6 dBi Signal Gain
- Can also be used Indoors
- Improves signal stability and reception
- Suitable for all DrayTek LTE routers
- Wall or Pole mountable (includes fittings)
- Supplied singly (but most routers require two)
- 4G, 3G, 2G & LTE Compatible. (See band support)
- N-Plug Connector
- Requires N-to-SMA cable (sold separately)
£37.96
- Supports USB-C input and VGA output
- Supports DisplayPort 1.2 Alt-mode
- Supports content protection of HDCP
- Supports VGA resolutions up to 1920x 1200 @60Hz / 2048x 1152 @60Hz
- USB-C female ports supplies power up to 60w (20v/3a)
- Supports per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR)
£9.43
- 4pin male molex to female SATA power cable
- 0.20Mtr in length
£0.56
- Single faceplate
- Pre-cut
- SVGA Stub provided
- SVGA cables available on request
£8.90
- Support USB-C input and VGA, USB3.0 output
- Support USB 3.0 super speed (5Gbps) transmission, backward compatible with USB2.0
- USB 3.0 port supports charging and transmitting data for the USB device simultaneously
- Support BC1.2, the power of the USB-A port can be up to 7.5w (5v/1.5a)
- Support per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR)
- Support VGA resolution up to 1920x 1200 @60Hz / 1080P @60Hz
- Windows & MAC OS supported
£13.46
check_circle
check_circle