Sort by:
- USB + SVGA KVM Cable
- SVGA Male to Female SVGA + USB type A to type B
- 3 Mini Coax 28AWG + 4 Twisted Pair 24AWG
- Moulded
- Braid, Shield and drain wire
£7.68
- Supports USB-C, VGA, USB3.0 and Gigabit Ethernet port
- Supports USB 3.0 Super Speed (5Gbps) transmission, backwards compatible with USB2.0
- USB 3.0 port supports to charge and transmit data for the USB device simultaneously
- Supports BC1.2, the power of USB-A port can be up to 7.5w (5V/1.5a)
- Supports VGA resolution up to 2048x 1152 @60Hz / 1080p @60Hz
- Supports 10/ 100/1000Mbps bandwidth
- Supports twisted pair crossover detection and auto-correction
£23.83
- 4 Pin Molex to 4 Pin P4 power
- 15cm
£0.44
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£36.71
- DVI-D with integrated USB
- USB type A male to USB type B male
- USB uses 28/24 awg cores and shielded
- Dark Grey cable and connectors
- Gold flashed contacts
£11.33
- Supports USB-C input and VGA output
- Flexible USB Type-C Switching
- Supports DisplayPort 1.2 Altmode
- Supports per lane data rates of 2.7Gbps (HBR) and 1.62Gbps (RBR)
- Supports resolution up to 2048x1152
- USB bus power (no external power supply)
- 15cm lead
£8.71
- ATX Cable
- 24pin Male to 24pin female
- 30cm
- 18 AWG
- Colour : Black
£2.28
- 19 Inch 1u Rack Mountable
- 24 Cat6a 10Gbps Shielded Ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£35.04
- Local and Remote Units supplied in the same box
- Cat 5 / 5E / 6 UTP Cable is used to connect the Local Unit to the Remote Unit
- No additional software required, Operating System independent
- Allows Remote Unit (keyboard, mouse and monitor) to be up to 150 Mtrs from the Local Unit
- Video Compensation can be adjusted by hotkey to ensure the optimum signal quality for any length of cable within the 150 Mtr limit
- Allows a single computer to be shared between the Local and Remote locations
- Beep confirmation for every keystroke or button press
- Support for standard USB Keyboard & Mice, including Microsoft IntelliMouse
- Compatible with VGA, SVGA and XGA System. Max resolution 1024 x 768
£185.59
- Supports USB-C input and VGA output
- Supports DisplayPort 1.2 Alt-mode
- Supports content protection of HDCP
- Supports VGA resolutions up to 1920x 1200 @60Hz / 2048x 1152 @60Hz
- USB-C female ports supplies power up to 60w (20v/3a)
- Supports per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR)
£9.43
- 4pin male molex to female SATA power cable
- 0.20Mtr in length
£0.56
- 16/24/48 Port Patch Panel
- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
£26.50
check_circle
check_circle
