Sort by:
- Extends HDMI up to 60 metres
- Supports 1080p resolution
- 3D Compatible
- HDCP Compliant
£35.52
- Parallel Printer Cable - Bidirectional
- D25 Male - 36 Centronic Male
- Moulded grey PVC cable
- 25C 28AWG, Alum-Mylar foil shielding with drain wire, OD 7.0
- Moulded thumbscrews
£10.09
- Parallel Printer Cable - Bidirectional
- D25 Male - 36 Centronic Male
- Moulded grey PVC cable
- 25C 28AWG, Alum-Mylar foil shielding with drain wire, OD 7.0
- Moulded thumbscrews
£11.58
- Parallel Printer Cable
- 36 Centronic Male to Male
- Moulded grey PVC cable
- 25C 28AWG, Alum-Mylar foil shielding with drain wire, OD 7.0
- Moulded thumbscrews
£9.20
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£22.03
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£25.42
- Power
- Volts: 12V
- Amps: 1.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£18.65
- 305MTR
- CAT 5 E
- UTP 4 Pair
- Stranded (ETL Verified)
- 24 AWG Bare copper cores
- Un-Shielded
£179.09
- Power
- Volts: 12V
- Amps: 3.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.5mm
£18.65
- Power
- Volts: 12V
- Amps: 1.5A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£18.65
- Rack Mounting Plate
- 1U Height
- Router securely slots into place
- Suitable for these DrayTek Vigor router series:
- Vigor 2832
- Vigor 2860
- Vigor 2862
- Vigor 2865
- Vigor 2925
- Vigor 2926
- Vigor 2927
- VigorBX 2000
£40.67
- Use with VigorAP 918RPD
- Power a 2nd device through the VigorAP's PoE Output
- Passive High Power PoE Injector
- Gigabit Data In & Data+PoE Out Ports
- For use with the DrayTek VigorAP 918RPD/920RPD only. Not compatible with 802.3af/at products
£54.22
check_circle
check_circle
