Sort by:
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£22.03
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£25.42
- Power
- Volts: 12V
- Amps: 1.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£18.65
- Power
- Volts: 12V
- Amps: 3.0A
- Jack Size
- Outer: 5.5mm
- Inner: 2.5mm
£18.65
- Power
- Volts: 12V
- Amps: 1.5A
- Jack Size
- Outer: 5.5mm
- Inner: 2.1mm
£18.65
- Rack Mounting Plate
- 1U Height
- Router securely slots into place
- Suitable for these DrayTek Vigor router series:
- Vigor 2832
- Vigor 2860
- Vigor 2862
- Vigor 2865
- Vigor 2925
- Vigor 2926
- Vigor 2927
- VigorBX 2000
£40.67
- Use with VigorAP 918RPD
- Power a 2nd device through the VigorAP's PoE Output
- Passive High Power PoE Injector
- Gigabit Data In & Data+PoE Out Ports
- For use with the DrayTek VigorAP 918RPD/920RPD only. Not compatible with 802.3af/at products
£54.22
- Cable Length: 1 Meter
- Extension Connector: SMA
- Antenna Connector: SMA
- Magnetic base
- 1M Extension cable
- Kit includes two extension bases
- Extend 4G LTE aerials away from the router
- Allows aerials to be located in the optimum position
- Compatible with DrayTek Vigor routers with integrated LTE modems
- Suitable for use with all 4G LTE and 3G frequency bands in use in the UK
- Available in black only
- Suitable for indoor use only
- Can be wall mounted (use 3M Command strips, not included)
£22.03
- Omnidirectional Outdoor Aerial
- 4-6 dBi Signal Gain
- Can also be used Indoors
- Improves signal stability and reception
- Suitable for all DrayTek LTE routers
- Wall or Pole mountable (includes fittings)
- Supplied singly (but most routers require two)
- 4G, 3G, 2G & LTE Compatible. (See band support)
- N-Plug Connector
- Requires N-to-SMA cable (sold separately)
£47.45
- Operation Band: 2.4GHz and 5GHz
- Standard: IEEE 802.11a/b/g/n/ac/ax
- 2.4GHz Frequency Range: 2400 to 2500 MHz
- 5GHz Frequency Range: 5150 to 5850 MHz
- 2.4GHz Gain: 5 dBi
- 5GHz Gain: 4.5 dBi
- HPBW Horizontal: 360°
- HPBW Vertical at 2.4GHz: 30°
- HPBW Vertical at 5GHz: 25°
- 2.4GHz Voltage Standing Wave Ratio(VSWR): < 2.0
- 5GHz Voltage Standing Wave Ratio(VSWR): < 2.0
- Polarization: Linear
- Power Handling: 1W
- Impedance: 50 Ω
- Connector Type: RP SMA Plug
- Environment: Indoors
- Package Contents: 2x ANT-1205 Antennas
- Dimensions: 198mm Length, 13mm Diameter
£15.25
- Operation Band: 2.4GHz and 5GHz
- Standard: IEEE 802.11a/b/g/n/ac/ax
- 2.4GHz Frequency Range: 2400 to 2500 MHz
- 5GHz Frequency Range: 5150 to 5850 MHz
- 2.4GHz Gain: 5 dBi
- 5GHz Gain: 4.5 dBi
- HPBW Horizontal: 360°
- HPBW Vertical at 2.4GHz: 30°
- HPBW Vertical at 5GHz: 25°
- 2.4GHz Voltage Standing Wave Ratio(VSWR): < 2.0
- 5GHz Voltage Standing Wave Ratio(VSWR): < 2.0
- Polarization: Linear
- Power Handling: 1W
- Impedance: 50 Ω
- Connector Type: RP SMA Plug
- Environment: Indoors
- Package Contents: 2x ANT-1205 Antennas
- Dimensions: 198mm Length, 13mm Diameter
£15.25
check_circle
check_circle