Sort by:
- Extension Cable 5¼ Male to Female
- 18cm (From end to end)
£2.74
- 19 Inch 1u Rack Mountable
- 24 Cat6a 10Gbps Shielded Ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£43.79
- Multifunctional on switching: intelligent or mechanical
- Low power costs
- IR extender receiver (included)
- IR remote (included)
- Operation up to 3.4 Gbps per lane (10.2Gbps all channel)
- Support up to 48-bit per pixel Deep Colour TM
- HDCP pass-through
- Supports uncompressed audio such as LPCM
- Supports compressed audio such as DTS Digital, Dolby Digital including DTS-HD and Dolby True HD)
- Support Full 3D and 4k*2k 24 Hz resolution, bandwidth up to 340MHz
£19.51
- CPU Switch "Spider" cable
- To suit NLKVM or manual KVM range
- 3 Metre
- Colour coded PS/2 connectors Mouse/Keyboard
- 2x Male - Male PS/2 1x Male - Male SVGA cable
£9.59
- Power Splitter Cable 5¼ to 3x 5¼
- Adds 2 extra 4 Pin Molex sockets
£3.37
- 16/24/48 Port Patch Panel
- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
£33.12
- SVGA / KVM Cable
- 2x Male PS/2 + 1x SVGA Male
- 2x Male PS/2 + 1x SVGA Female
- Colour Coded PS/2 Connectors
- Moulded
£10.21
- 3 Pin Female to 2 x 3 Pin Male Fan Splitter Cable
- 15cm
- 18awg
£1.44
- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£13.97
- SVGA / KVM Cable
- 2x Male PS/2 + 1x SVGA Male
- 2x Male PS/2 + 1x SVGA Female
- Colour Coded PS/2 Connectors
- Moulded
£7.64
- Power Splitter 5¼ Male to Female and 3 Pin Case Fan
- Adds a 3 pin case fan connection
£2.16
- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£18.53
check_circle
check_circle
