Sort by:
- One piece of CAT-5e/6 cable can substitute DVI cable to achieve long distance transmission
- Supports DVI-D output
- Transmission distance can be up to 50 metres for 1920 x 1080 using UTP cable
- Auto-adjustment of feedback, equalization and amplification
- Supports highest video resolution 1920 x 1080 @ 50/60Hz
- Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth
- Supports 8bit per channel (24bit all channel) deep colour
£75.01
- 19Inch bar
- 1U
- 5 removable plastic holders
- Internal dimensions of the rings are 53mm x 28mm
- Black
£0.91
- Compatible with all RS-232 protocols
- Pure hardware solution - real time data transfer
- No external power required
- Max distance: 1000m/3300ft (utp)
- Communication mode: Full-duplex data
- Power supply: DC9V / 300mA (Min.) spare
- Housing: Metal
- Weight 65g
£97.21
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£4.78
- Supports resolutions up to 1080p @ 60Hz
- Uses advanced HDbitT transport protocol
- Transmits up to 120mtrs
- Uses a single Cat5/Cat5e or CAT6 cable
- Supports RGBHV
- Supports 3.5mm audio
- Metal heat sink design
£132.00
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£14.16
- Supports SVGA (KVM-VGAXT)
- Supports a maximum distance of 150 Mtrs (492ft)
- SVGA resolution up to 1024x768
- Ultra Compact
- Compatible with CAT5, CAT5E and CAT 6 UTP Cable
£120.44
- 19 Inch 1u Rack mountable
- 24 Cat5e Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£4.10
- Supports SVGA and Audio (KVM-VGAXTAD)
- Supports a maximum distance of 150 Mtrs (492ft)
- SVGA resolution up to 1024x768
- Ultra Compact
- Compatible with CAT5, CAT5E and CAT 6 UTP Cable
£141.43
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£4.63
- Extend the VGA signal up to 80 metre away by using the VGA Extender and one CAT5/CAT6 cable
- Supports power over cable technique, only one unit (Local or Remote) needs to connect to PSU
- Both Local and Remote can act as the PSE (power source equipment)
- Maximum resolution: 2048 x 1536 60Hz (Dependant on length of extension)
- Equalization length is adjustable
- VGA signal gain is adjustable
- Metal Housing
£123.34
- 19 Inch 1u Rack mountable
- 24 Cat6 Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£4.50
check_circle
check_circle