Sort by:
- 4 Pin female molex
- 15 pin male SATA power
- Gold flashed contacts
£2.54
- Meets the TIA/EIA-568-B.2-1 Category 6 Channel Testing Performance requirements.
- Supports T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
£70.80
- 3 Pin XLR male – 3 Pin XLR male
- Metal shell
- Gold flashed pins
£1.58
- Supports SVGA (KVM-VGAXT)
- Supports a maximum distance of 150 Mtrs (492ft)
- SVGA resolution up to 1024x768
- Ultra Compact
- Compatible with CAT5, CAT5E and CAT 6 UTP Cable
£120.44
- SATA Power Splitter/Extension
- 1 x Male connector
- 3 x Female connector
- Total length 85cm
£2.04
- 19 Inch 1u Rack mountable
- 24 Cat5e Unshielded ports
- Keystone Jack in-line couplers
- Black
- Supplied with cable management bar
£20.51
- 6.35mm TRS Male
- 3 Pin XLR Female
- Metal connectors
- Gold plated XLR pins
£1.73
- Supports SVGA and Audio (KVM-VGAXTAD)
- Supports a maximum distance of 150 Mtrs (492ft)
- SVGA resolution up to 1024x768
- Ultra Compact
- Compatible with CAT5, CAT5E and CAT 6 UTP Cable
£141.43
- Power Cable 5¼ to 3½
- To power a floppy drive
- About 17.5cm
£1.36
- Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements
- Support T568 A&B wiring & Easy installation
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables
- Compatible with 110 or Krone Tools
- Backwards compatible with Category 3 & 5
- All versions can be mounted in 19 Racks
- Supplied with cable management bar
£23.17
- 3 Pin XLR male
- RCA female
- Gold plated pins
£1.51
- Extend the VGA signal up to 80 metre away by using the VGA Extender and one CAT5/CAT6 cable
- Supports power over cable technique, only one unit (Local or Remote) needs to connect to PSU
- Both Local and Remote can act as the PSE (power source equipment)
- Maximum resolution: 2048 x 1536 60Hz (Dependant on length of extension)
- Equalization length is adjustable
- VGA signal gain is adjustable
- Metal Housing
£123.34
check_circle
check_circle
