Sort by:
- 4 Pin Molex to Serial ATA Power Supply
- 4 Pin male molex power
- 15pin female SATA power
- 18 AWG
- 15cm
£0.43
- Continuity tester for RJ45 (8P8C) UTP or STP Patch Cables
- Tests RJ11 (6P4C) and RJ12 (6P6C)
- Easy to read LED display
- Supplied with remote unit for testing installed wall ports
- Adjustable speed settings
- Maximum test length of up to 1000 ft (305 Mtrs)
£14.21
- 4 Pin Molex to Serial ATA Power Supply
- 4 Pin male molex power
- Two 15pin female SATA power connectors
- 18 AWG
- 0.2MTR
£0.64
- Insertion tool
- Stripping tool(various sizes)
- Plastic handle
- Metal blades
- Pack of 10
£4.10
- Power Cable 5¼ to 3½
- To power a floppy drive
- 17.5cm
£0.44
- Modular plug, crimp, strip, and cutting tool
- Strips flat and round cable
- For 8P8C connectors only
£3.12
- Molex Power Splitter
- Molex Male to 2x Molex Female
- Adds one extra 4 Pin Molex
- 18AWG cores
- 23cm
£0.64
- Integrated, spring loaded blade cuts off excess automatically
- Small hook to remove any existing wires from socket
- Small blade to cut and strip wires to a desired length
- Small blade to cut and strip wires to a desired length
£1.85
- Power Splitter Cable 5¼ to 3½ & 5¼
- Adds 1 Molex mini-spox
£0.66
- Impact punch down tool
- Adjustable
- High pressure 15 ± 2Kg
- Low pressure 10 ± 2Kg
- Reversible blade
£3.50
- Power splitter cable, 4 pin Molex to twin 4 pin Floppy Disk Drive connector (mini-spox). Adds two floppy drive connectors by using a 4 pin Molex.
£0.64
- Key Features
- Supports 1Gb/s and 10Gb/s
- Transfer speeds are dependant on devices being linked i.e. both must support 10Gbps SFP+ for 10Gbps operation
- Hot-pluggable
- Standard SFP / SFP+ Form Factor
- Compatible with SFP+ MSA specifications
- Compatible with SFF-8431 & SFF8432 specifications
- Power Consumption: Up to 0.2 Watts
- Operating Voltage: 3.3 Volts (supplied by connected devices)
- Operating Temperature Range: 0 ° to 70 ° C
- Operating Humidity: 0 to 85% RH (non-condesnsing)
- Storage Temperature: -40 ° to 85 ° C
£17.63
check_circle
check_circle
